Craving an increase in bass response in your Aluminum Body F-Series SuperCrew or SuperCab yet need all of your under-seat space left open? The MTI Acoustics behind seat enclosure has you covered. For the SCREW/SCAB owners, you can utilize the LMI Welding Straight Ahead kit to increase overall depth and volume. If ordering without a subwoofer, please email ahead of placing an order to verify the subwoofer you are using will fit.

Due to the custom nature of this item, all sales are final, without exception.

-Fits all 13th/14th Generation F150 (2015-2026) and all 4th/5th Generation Super Duty models (2017-2026)
-2024+ Ford F150 and 2023+ Ford Superduty WITH B&O mount in reverse. The subwoofer enclosure is behind the driver, with the amp rack behind the passenger. Vehicles equipped with the 2.0kW Pro Power and B&O may require further modifications, depending on the gear being used.
Want to take the guess work out of the equation? See our bundled offerings.
https://mtiacoustics.net/all-enclosures.html#!/MTI-Acoustics-Ford-F-Series-Half-Length-Behind-Seat-Bundles/p/521534154

Have questions on the installation? We have that handled.

-Relocation of the OEM jack/jack holder is required for fitment.
-Fits models with/without the power sliding rear window.
-Maximum mounting depth without modification is 3.5"
-Maximum mounting depth with straight ahead kit is 5"
https://www.mtiacoustics.net/all-enclosures.html#!...

-Total outer width 33" (While being able to use the shorty amp rack)
2015-2023 F150, 2017-2022 Superduty. 24+ F150, 2023+ SuperDuty without B&O.
-Total outer width for Driver's Side on 24+ F150, 23+ Superduty with B&O 23"
-Total outer height 14"
-Total outer depth (without 1520SA) 4"
-Total outer depth (with 1520SA) 5.75"
-Max internal volume without moving seat forward: 0.60cu ft
-Ported will increase the overall width on all models to a full length enclosure.
-A subwoofer grill cannot be used in this application.
-Removal/trimming of the OEM back wall paneling is required.
-Needing an amplifier rack for the driver’s side? See below (For use with single 10″ sealed)
-If using the Dual sealed enclosure, a single ported enclosure, a single 13TW5 sealed, you will need to relocate the OEM amp if equipped. The aforementioned enclosures will not work with any of our behind seat amp racks.