
Mosconi ATOMO 1 offers maximum performance in the smallest of spaces. This extremely compact, powerful 1-channel amplifier has wide input voltage range -- 0.4V - 5V (low level) / 1.6 V - 20V (high level). It features inputs that are flexibly configurable (floating / fixed ground, switchable load resistors) and remote detection (BTL). For high pass / low pass filter, inputs feature Molex® industry standard (Micro-Fit) connections. Available in 12 V and 24 V versions.
Optional: EXT2-RCA for low-level input (see Specifications).
Power Supply:
Power supply voltage: 10 - 16 V
DC-DC converter typology: Unregulated – Push Pull
External fuse: 1 x 20 A
Power-on/Power-off voltage threshold: 9 V/6 V
Mute delay time: 3 secs
Autosense power-on (HL only): BTL source only
Overall efficiency: > 75 %
Standby current: < 0.1 mA (typical)
Idle current: 0.45 A at 14.4 V
Thermal cutoff threshold: 93 degrees C (± 5 %)
Output Power RMS at 14.4V (1% THD)
Output power RMS at 4 Ohms: 1 x 205 W (250 W at 16 V)
Output power RMS at 2 Ohms: 1 x 350 W
T.H.D. at 4 Ohms: < 0.08 % (1 kHz / 90 Power rating ref)
T.H.D. at 2 Ohms: < 0.1 % (1 kHz / 90 Power rating ref)
Minimum load: 2 Ohms with musical signal
Signal Input:
Low level input sensitivity range: 0.26 ÷ 0.7 Vrms
High level input sensitivity range: 1.3 ÷ 3.5 Vrms
Bandwidth (- 3 dB ÷ 10 W): 5 Hz ÷ 35 kHz
Low level Input impedance: > 15 kOhms
High level input impedance: 21 Ohms (dummy load with jumper)
Ground reference (LL only): OPEN - 21 Ohms
Features:
Onboard filter configuration: OFF - LP
Onboard filter slope: 12 dB/Oct
Onboard filter frequency: 80 Hz
Autosense power-on (HL only): BTL source only
Start & Stop compliance: yes
Connections:
Low/High level input: Micro-Fit
Speaker out: Mini-Fit
Power supply: Mini-Fit
Appearance:
Dimensions: 86 x 65 x 34 mm
Weight: 280 grams
Finishing: Black anodized
(RMS = Root Mean Square, measure of continuous power in audio devices)
DATASHEET for Mosconi ATOMO 1 Amp
MANUAL for Mosconi ATOMO 1 Amp
catb v1 03.25.2026